High Quality Camping Lights / Folding LED Camping Lantern / Hanging Tent LED Light

·     NO BATTERIES, SOLAR OR CHARGING REQUIRED - The  lantern converts heat from the oil unit into electricity to power 3 / 200 Lumen LED light strips and amplifies the light by 200 times.
 

·     LIGHT UP AN ENTIRE ROOM - Unfold the legs and switch to room mode to brighten the area with 2 LED strips on each side of the lantern. No more working in the dark during a power outage. You can also use the handle on top to hang the lantern on a hook.
 

·     LIFE SAVER FLASHLIGHT - Contains a 200 lumen front LED light strip great for nature walks, camping, and exploring during power outages. Use the handle and fold the legs for a compact flashlight mode.
 

·     BE ALWAYS PREPARED FOR EMERGENCIES - No more worrying about old batteries not working. With  the lantern has infinite storage life that is reliable in any emergency setting.
 

·      REDUCES OIL CONSUMPTION BY 90% - Saves the environment with a 90% reduction in CO2 and Black Carbon Emission. Our oil units are 100% recyclable and are engineered to use 5ml of oil per hour lasting 8 to 9 hours per oil unit.
 

1.Unscrew the Luminiser oil unit from the base of the Luminiser.Inspect for damage.Do not use any damaged unit

2.If there is oil around the wick,it should be wiped off before the wick is lit.Oil spills will cause unnecessary smoke until it has evaporated

3.Light the wick on oil until and wait a second to ensure stabile flame

4.Screw the oil unit into the base until upi hear a click,which locks it in the right position.

5.Depending on the outside temperature,after 30-30second,the Luminiser lantern is ready to light up your world

6.Seclect your preferred lighting option by the swithch:

   0=Oil flame light only

   1=front LED

   2=both side LED

7.To shut down the lantern,simply blow out the flame through the air outlet in the top or unscrew the oil unit from the base and blow out the flame
 

1.Be sure to burn out of reach of children and pets

2.Never leave a burning light unattened.Always extinguish the flame before leaving a room

3.Avoid direct inhalation of any smoke

4.Do not burn lights on ore near anyting that may catch fire.Always remember that oil unit has is a naked flame.Pay close attention to the flame to avoid a fire hazard